|
|
| XrlPimNode (int family, xorp_module_id module_id,
EventLoop& eventloop, XrlRouter* xrl_router)
| XrlPimNode |
| ~XrlPimNode ()
| ~XrlPimNode |
[virtual]
| int enable_cli ()
| enable_cli |
| int disable_cli ()
| disable_cli |
| int start_cli ()
| start_cli |
| int stop_cli ()
| stop_cli |
| int enable_pim ()
| enable_pim |
| int disable_pim ()
| disable_pim |
| int start_pim ()
| start_pim |
| int stop_pim ()
| stop_pim |
| int enable_bsr ()
| enable_bsr |
Reimplemented from PimNode.
| int disable_bsr ()
| disable_bsr |
Reimplemented from PimNode.
| int start_bsr ()
| start_bsr |
Reimplemented from PimNode.
| int stop_bsr ()
| stop_bsr |
Reimplemented from PimNode.
| int proto_send (const string& dst_module_instance_name,
xorp_module_id dst_module_id,
uint16_t vif_index,
const IPvX& src, const IPvX& dst,
int ip_ttl,int ip_tos, bool router_alert_bool,
const uint8_t * sndbuf, size_t sndlen)
| proto_send |
[protected]
Reimplemented from ProtoNode.
| void xrl_result_send_protocol_message (const XrlError& xrl_error)
| xrl_result_send_protocol_message |
[protected]
| int start_protocol_kernel ()
| start_protocol_kernel |
[protected]
Reimplemented from PimNode.
| void xrl_result_add_protocol_mfea (const XrlError& xrl_error)
| xrl_result_add_protocol_mfea |
[protected]
| void xrl_result_allow_signal_messages (const XrlError& xrl_error)
| xrl_result_allow_signal_messages |
[protected]
| void xrl_result_allow_mrib_messages (const XrlError& xrl_error)
| xrl_result_allow_mrib_messages |
[protected]
| int stop_protocol_kernel ()
| stop_protocol_kernel |
[protected]
Reimplemented from PimNode.
| void xrl_result_delete_protocol_mfea (const XrlError& xrl_error)
| xrl_result_delete_protocol_mfea |
[protected]
| int start_protocol_kernel_vif (uint16_t vif_index)
| start_protocol_kernel_vif |
[protected]
Reimplemented from PimNode.
| void xrl_result_start_protocol_kernel_vif (const XrlError& xrl_error)
| xrl_result_start_protocol_kernel_vif |
[protected]
| int stop_protocol_kernel_vif (uint16_t vif_index)
| stop_protocol_kernel_vif |
[protected]
Reimplemented from PimNode.
| void xrl_result_stop_protocol_kernel_vif (const XrlError& xrl_error)
| xrl_result_stop_protocol_kernel_vif |
[protected]
| int join_multicast_group (uint16_t vif_index,
const IPvX& multicast_group)
| join_multicast_group |
[protected]
Reimplemented from PimNode.
| void xrl_result_join_multicast_group (const XrlError& xrl_error)
| xrl_result_join_multicast_group |
[protected]
| int leave_multicast_group (uint16_t vif_index,
const IPvX& multicast_group)
| leave_multicast_group |
[protected]
Reimplemented from PimNode.
| void xrl_result_leave_multicast_group (const XrlError& xrl_error)
| xrl_result_leave_multicast_group |
[protected]
| int add_mfc_to_kernel (const PimMfc& pim_mfc)
| add_mfc_to_kernel |
[protected]
Reimplemented from PimNode.
| void xrl_result_add_mfc_to_kernel (const XrlError& xrl_error)
| xrl_result_add_mfc_to_kernel |
[protected]
| int delete_mfc_from_kernel (const PimMfc& pim_mfc)
| delete_mfc_from_kernel |
[protected]
Reimplemented from PimNode.
| void xrl_result_delete_mfc_from_kernel (const XrlError& xrl_error)
| xrl_result_delete_mfc_from_kernel |
[protected]
| int add_dataflow_monitor (const IPvX& source_addr,
const IPvX& group_addr,
uint32_t threshold_interval_sec,
uint32_t threshold_interval_usec,
uint32_t threshold_packets,
uint32_t threshold_bytes,
bool is_threshold_in_packets,
bool is_threshold_in_bytes,
bool is_geq_upcall,
bool is_leq_upcall)
| add_dataflow_monitor |
[protected]
Reimplemented from PimNode.
| void xrl_result_add_dataflow_monitor (const XrlError& xrl_error)
| xrl_result_add_dataflow_monitor |
[protected]
| int delete_dataflow_monitor (const IPvX& source_addr,
const IPvX& group_addr,
uint32_t threshold_interval_sec,
uint32_t threshold_interval_usec,
uint32_t threshold_packets,
uint32_t threshold_bytes,
bool is_threshold_in_packets,
bool is_threshold_in_bytes,
bool is_geq_upcall,
bool is_leq_upcall)
| delete_dataflow_monitor |
[protected]
Reimplemented from PimNode.
| void xrl_result_delete_dataflow_monitor (const XrlError& xrl_error)
| xrl_result_delete_dataflow_monitor |
[protected]
| int delete_all_dataflow_monitor (const IPvX& source_addr,
const IPvX& group_addr)
| delete_all_dataflow_monitor |
[protected]
Reimplemented from PimNode.
| void xrl_result_delete_all_dataflow_monitor (const XrlError& xrl_error)
| xrl_result_delete_all_dataflow_monitor |
[protected]
| int add_protocol_mld6igmp (uint16_t vif_index)
| add_protocol_mld6igmp |
[protected]
Reimplemented from PimNode.
| void xrl_result_add_protocol_mld6igmp (const XrlError& xrl_error)
| xrl_result_add_protocol_mld6igmp |
[protected]
| int delete_protocol_mld6igmp (uint16_t vif_index)
| delete_protocol_mld6igmp |
[protected]
Reimplemented from PimNode.
| void xrl_result_delete_protocol_mld6igmp (const XrlError& xrl_error)
| xrl_result_delete_protocol_mld6igmp |
[protected]
| int add_cli_command_to_cli_manager (const char *command_name,
const char *command_help,
bool is_command_cd,
const char *command_cd_prompt,
bool is_command_processor)
| add_cli_command_to_cli_manager |
[protected]
Reimplemented from ProtoNodeCli.
| void xrl_result_add_cli_command (const XrlError& xrl_error)
| xrl_result_add_cli_command |
[protected]
| int delete_cli_command_from_cli_manager (const char *command_name)
| delete_cli_command_from_cli_manager |
[protected]
Reimplemented from ProtoNodeCli.
| void xrl_result_delete_cli_command (const XrlError& xrl_error)
| xrl_result_delete_cli_command |
[protected]
| XrlCmdError common_0_1_get_target_name (
string& name)
| common_0_1_get_target_name |
[protected]
Get name of Xrl Target
| XrlCmdError common_0_1_get_version (
string& version)
| common_0_1_get_version |
[protected]
Get version string from Xrl Target
| XrlCmdError common_0_1_get_status (
uint32_t& status,
string& reason)
| common_0_1_get_status |
[protected]
Get status from Xrl Target
| XrlCmdError common_0_1_shutdown ()
| common_0_1_shutdown |
[protected]
shutdown cleanly
| XrlCmdError cli_processor_0_1_process_command (
const string& processor_name,
const string& cli_term_name,
const uint32_t& cli_session_id,
const string& command_name,
const string& command_args,
string& ret_processor_name,
string& ret_cli_term_name,
uint32_t& ret_cli_session_id,
string& ret_command_output)
| cli_processor_0_1_process_command |
[protected]
Process a CLI command.
Parameters:
| processor_name | the processor name for this command. |
| cli_term_name | the terminal name the command was entered from. |
| cli_session_id | the CLI session ID the command was entered from. |
| command_name | the command name to process. |
| command_args | the command arguments to process. |
| ret_processor_name | the processor name to return back to the CLI. |
| ret_cli_term_name | the terminal name to return back. |
| ret_cli_session_id | the CLI session ID to return back. |
| ret_command_output | the command output to return back. |
| XrlCmdError mfea_client_0_1_new_vif (
const string& vif_name,
const uint32_t& vif_index)
| mfea_client_0_1_new_vif |
[protected]
Add a new vif.
Parameters:
| vif_name | the name of the new vif. |
| vif_index | the index of the new vif. |
| XrlCmdError mfea_client_0_1_delete_vif (
const string& vif_name)
| mfea_client_0_1_delete_vif |
[protected]
Delete an existing vif.
Parameters:
| vif_name | the name of the vif to delete. |
| XrlCmdError mfea_client_0_1_add_vif_addr4 (
const string& vif_name,
const IPv4& addr,
const IPv4Net& subnet,
const IPv4& broadcast,
const IPv4& peer)
| mfea_client_0_1_add_vif_addr4 |
[protected]
Add an address to a vif.
Parameters:
| vif_name | the name of the vif. |
| addr | the unicast address to add. |
| subnet | the subnet address to add. |
| broadcast | the broadcast address (when applicable). |
| peer | the peer address (when applicable). |
| XrlCmdError mfea_client_0_1_add_vif_addr6 (
const string& vif_name,
const IPv6& addr,
const IPv6Net& subnet,
const IPv6& broadcast,
const IPv6& peer)
| mfea_client_0_1_add_vif_addr6 |
[protected]
| XrlCmdError mfea_client_0_1_delete_vif_addr4 (
const string& vif_name,
const IPv4& addr)
| mfea_client_0_1_delete_vif_addr4 |
[protected]
Delete an address from a vif.
Parameters:
| vif_name | the name of the vif. |
| addr | the unicast address to delete. |
| XrlCmdError mfea_client_0_1_delete_vif_addr6 (
const string& vif_name,
const IPv6& addr)
| mfea_client_0_1_delete_vif_addr6 |
[protected]
| XrlCmdError mfea_client_0_1_set_vif_flags (
const string& vif_name,
const bool& is_pim_register,
const bool& is_p2p,
const bool& is_loopback,
const bool& is_multicast,
const bool& is_broadcast,
const bool& is_up)
| mfea_client_0_1_set_vif_flags |
[protected]
Set flags to a vif.
Parameters:
| vif_name | the name of the vif. |
| is_pim_register | true if this is a PIM Register vif. |
| is_p2p | true if this is a point-to-point vif. |
| is_loopback | true if this is a loopback interface. |
| is_multicast | true if the vif is multicast-capable. |
| is_broadcast | true if the vif is broadcast-capable. |
| is_up | true if the vif is UP and running. |
| XrlCmdError mfea_client_0_1_set_all_vifs_done ()
| mfea_client_0_1_set_all_vifs_done |
[protected]
Complete all transactions with vif information.
| XrlCmdError mfea_client_0_1_is_vif_setup_completed (
bool& is_completed)
| mfea_client_0_1_is_vif_setup_completed |
[protected]
Test if the vif setup is completed.
Parameters:
| is_completed | if true the vif setup is completed. |
| XrlCmdError mfea_client_0_1_recv_protocol_message4 (
const string& xrl_sender_name,
const string& protocol_name,
const uint32_t& protocol_id,
const string& vif_name,
const uint32_t& vif_index,
const IPv4& source_address,
const IPv4& dest_address,
const int32_t& ip_ttl,
const int32_t& ip_tos,
const bool& is_router_alert,
const vector<uint8_t>& protocol_message)
| mfea_client_0_1_recv_protocol_message4 |
[protected]
Receive a protocol message from the MFEA.
Parameters:
| xrl_sender_name | the XRL name of the originator of this XRL. |
| protocol_name | the name of the protocol that sends a message. |
| protocol_id | the ID of the protocol that sends a message (both sides must agree on the particular values). |
| vif_name | the name of the vif the message was received on. |
| vif_index | the index of the vif the message was received on. |
| source_address | the address of the sender. |
| dest_address | the destination address. |
| ip_ttl | the TTL of the received IP packet. If it has a negative value, it should be ignored. |
| ip_tos | the TOS of the received IP packet. If it has a negative value, it should be ignored. |
| is_router_alert | if true, the IP Router Alert option in the IP packet was set (when applicable). |
| protocol_message | the protocol message. |
| XrlCmdError mfea_client_0_1_recv_protocol_message6 (
const string& xrl_sender_name,
const string& protocol_name,
const uint32_t& protocol_id,
const string& vif_name,
const uint32_t& vif_index,
const IPv6& source_address,
const IPv6& dest_address,
const int32_t& ip_ttl,
const int32_t& ip_tos,
const bool& is_router_alert,
const vector<uint8_t>& protocol_message)
| mfea_client_0_1_recv_protocol_message6 |
[protected]
| XrlCmdError mfea_client_0_1_recv_kernel_signal_message4 (
const string& xrl_sender_name,
const string& protocol_name,
const uint32_t& protocol_id,
const uint32_t& message_type,
const string& vif_name,
const uint32_t& vif_index,
const IPv4& source_address,
const IPv4& dest_address,
const vector<uint8_t>& protocol_message)
| mfea_client_0_1_recv_kernel_signal_message4 |
[protected]
Receive a kernel signal message from the MFEA.
Parameters:
| xrl_sender_name | the XRL name of the originator of this XRL. |
| protocol_name | the name of the protocol that sends a message. |
| protocol_id | the ID of the protocol that sends a message (both sides must agree on the particular values). |
| message_type | the type of the kernel signal message (TODO: integer for now: the particular types are well-known by both sides). |
| vif_name | the name of the vif the message was received on. |
| vif_index | the index of the vif the message was received on. |
| source_address | the address of the sender. |
| dest_address | the destination address. |
| protocol_message | the protocol message. |
| XrlCmdError mfea_client_0_1_recv_kernel_signal_message6 (
const string& xrl_sender_name,
const string& protocol_name,
const uint32_t& protocol_id,
const uint32_t& message_type,
const string& vif_name,
const uint32_t& vif_index,
const IPv6& source_address,
const IPv6& dest_address,
const vector<uint8_t>& protocol_message)
| mfea_client_0_1_recv_kernel_signal_message6 |
[protected]
| XrlCmdError mfea_client_0_1_add_mrib4 (
const string& xrl_sender_name,
const IPv4Net& dest_prefix,
const IPv4& next_hop_router_addr,
const string& next_hop_vif_name,
const uint32_t& next_hop_vif_index,
const uint32_t& metric_preference,
const uint32_t& metric)
| mfea_client_0_1_add_mrib4 |
[protected]
Add Multicast Routing Information Base information.
Parameters:
| xrl_sender_name | the XRL name of the originator of this XRL. |
| dest_prefix | the destination prefix to add. |
| next_hop_router_addr | the address of the next-hop router toward the destination prefix. |
| next_hop_vif_name | the name of the vif toward the destination prefix. |
| next_hop_vif_index | the index of the vif toward the destination prefix. |
| metric_preference | the metric preference for this entry. |
| metric | the metric for this entry. |
| XrlCmdError mfea_client_0_1_add_mrib6 (
const string& xrl_sender_name,
const IPv6Net& dest_prefix,
const IPv6& next_hop_router_addr,
const string& next_hop_vif_name,
const uint32_t& next_hop_vif_index,
const uint32_t& metric_preference,
const uint32_t& metric)
| mfea_client_0_1_add_mrib6 |
[protected]
| XrlCmdError mfea_client_0_1_delete_mrib4 (
const string& xrl_sender_name,
const IPv4Net& dest_prefix)
| mfea_client_0_1_delete_mrib4 |
[protected]
Delete Multicast Routing Information Base information.
Parameters:
| xrl_sender_name | the XRL name of the originator of this XRL. |
| dest_prefix | the destination prefix to delete. |
| XrlCmdError mfea_client_0_1_delete_mrib6 (
const string& xrl_sender_name,
const IPv6Net& dest_prefix)
| mfea_client_0_1_delete_mrib6 |
[protected]
| XrlCmdError mfea_client_0_1_set_mrib_done (
const string& xrl_sender_name)
| mfea_client_0_1_set_mrib_done |
[protected]
Complete a transaction with MRIB information.
Parameters:
| xrl_sender_name | the XRL name of the originator of this XRL. |
| XrlCmdError mfea_client_0_1_recv_dataflow_signal4 (
const string& xrl_sender_name,
const IPv4& source_address,
const IPv4& group_address,
const uint32_t& threshold_interval_sec,
const uint32_t& threshold_interval_usec,
const uint32_t& measured_interval_sec,
const uint32_t& measured_interval_usec,
const uint32_t& threshold_packets,
const uint32_t& threshold_bytes,
const uint32_t& measured_packets,
const uint32_t& measured_bytes,
const bool& is_threshold_in_packets,
const bool& is_threshold_in_bytes,
const bool& is_geq_upcall,
const bool& is_leq_upcall)
| mfea_client_0_1_recv_dataflow_signal4 |
[protected]
A signal that a dataflow-related pre-condition is true.
Parameters:
| xrl_sender_name | the XRL name of the originator of this XRL. |
| source_address | the source address of the dataflow. |
| group_address | the group address of the dataflow. |
| threshold_interval_sec | the number of seconds in the interval requested for measurement. |
| threshold_interval_usec | the number of microseconds in the interval requested for measurement. |
| measured_interval_sec | the number of seconds in the last measured interval that has triggered the signal. |
| measured_interval_usec | the number of microseconds in the last measured interval that has triggered the signal. |
| threshold_packets | the threshold value to trigger a signal (in number of packets). |
| threshold_bytes | the threshold value to trigger a signal (in bytes). |
| measured_packets | the number of packets measured within the measured interval. |
| measured_bytes | the number of bytes measured within the measured interval. |
| is_threshold_in_packets | if true, threshold_packets is valid. |
| is_threshold_in_bytes | if true, threshold_bytes is valid. |
| is_geq_upcall | if true, the operation for comparison is ">=". |
| is_leq_upcall | if true, the operation for comparison is "<=". |
| XrlCmdError mfea_client_0_1_recv_dataflow_signal6 (
const string& xrl_sender_name,
const IPv6& source_address,
const IPv6& group_address,
const uint32_t& threshold_interval_sec,
const uint32_t& threshold_interval_usec,
const uint32_t& measured_interval_sec,
const uint32_t& measured_interval_usec,
const uint32_t& threshold_packets,
const uint32_t& threshold_bytes,
const uint32_t& measured_packets,
const uint32_t& measured_bytes,
const bool& is_threshold_in_packets,
const bool& is_threshold_in_bytes,
const bool& is_geq_upcall,
const bool& is_leq_upcall)
| mfea_client_0_1_recv_dataflow_signal6 |
[protected]
| XrlCmdError fti_0_2_start_transaction (
uint32_t& tid)
| fti_0_2_start_transaction |
[protected]
Start transaction.
Parameters:
| tid | the transaction ID to use for this transaction. |
| XrlCmdError fti_0_2_commit_transaction (
const uint32_t& tid)
| fti_0_2_commit_transaction |
[protected virtual]
Commit transaction.
Parameters:
| tid | the transaction ID of this transaction. |
| XrlCmdError fti_0_2_abort_transaction (
const uint32_t& tid)
| fti_0_2_abort_transaction |
[protected]
Abort transaction.
Parameters:
| tid | the transaction ID of this transaction. |
| XrlCmdError fti_0_2_add_entry4 (
const uint32_t& tid,
const IPv4Net& dst,
const IPv4& gateway,
const string& ifname,
const string& vifname,
const uint32_t& metric,
const uint32_t& admin_distance,
const string& protocol_origin)
| fti_0_2_add_entry4 |
[protected]
Add a routing entry.
Parameters:
| tid | the transaction ID of this transaction. |
| dst | the destination subnet address of the entry. |
| gateway | the address of the next-hop router toward dst. |
| ifname | the name of the physical interface toward dst. |
| vifname | the name of the virtual interface toward dst. |
| metric | the routing metric toward dst. |
| admin_distance | the administratively defined distance toward dst. |
| protocol_origin | the name of the protocol that originated this entry. |
| XrlCmdError fti_0_2_add_entry6 (
const uint32_t& tid,
const IPv6Net& dst,
const IPv6& gateway,
const string& ifname,
const string& vifname,
const uint32_t& metric,
const uint32_t& admin_distance,
const string& protocol_origin)
| fti_0_2_add_entry6 |
[protected]
Add a routing entry.
Parameters:
| tid | the transaction ID of this transaction. |
| dst | the destination subnet address of the entry. |
| gateway | the address of the next-hop router toward dst. |
| ifname | the name of the physical interface toward dst. |
| vifname | the name of the virtual interface toward dst. |
| metric | the routing metric toward dst. |
| admin_distance | the administratively defined distance toward dst. |
| protocol_origin | the name of the protocol that originated this entry. |
| XrlCmdError fti_0_2_delete_entry4 (
const uint32_t& tid,
const IPv4Net& dst)
| fti_0_2_delete_entry4 |
[protected]
Delete a routing entry.
Parameters:
| tid | the transaction ID of this transaction. |
| dst | the destination subnet address of the entry. |
| XrlCmdError fti_0_2_delete_entry6 (
const uint32_t& tid,
const IPv6Net& dst)
| fti_0_2_delete_entry6 |
[protected]
Delete a routing entry.
Parameters:
| tid | the transaction ID of this transaction. |
| dst | the destination subnet address of the entry. |
| XrlCmdError fti_0_2_delete_all_entries (
const uint32_t& tid)
| fti_0_2_delete_all_entries |
[protected]
Delete all routing entries for all address families.
Parameters:
| tid | the transaction ID of this transaction. |
| XrlCmdError fti_0_2_delete_all_entries4 (
const uint32_t& tid)
| fti_0_2_delete_all_entries4 |
[protected]
Delete all routing entries for the IPv4 address family.
Parameters:
| tid | the transaction ID of this transaction. |
| XrlCmdError fti_0_2_delete_all_entries6 (
const uint32_t& tid)
| fti_0_2_delete_all_entries6 |
[protected]
Delete all routing entries for the IPv6 address family.
Parameters:
| tid | the transaction ID of this transaction. |
| XrlCmdError fti_0_2_lookup_route4 (
const IPv4& dst,
IPv4Net& netmask,
IPv4& gateway,
string& ifname,
string& vifname,
uint32_t& metric,
uint32_t& admin_distance,
string& protocol_origin)
| fti_0_2_lookup_route4 |
[protected]
Lookup a route for a destination host address.
Parameters:
| dst | the destination host address to lookup. |
| gateway | the address of the next-hop router toward dst. |
| ifname | the name of the physical interface toward dst. |
| vifname | the name of the virtual interface toward dst. |
| metric | the routing metric toward dst. |
| admin_distance | the administratively defined distance toward dst. |
| protocol_origin | the name of the protocol that originated this entry. |
| XrlCmdError fti_0_2_lookup_route6 (
const IPv6& dst,
IPv6Net& netmask,
IPv6& gateway,
string& ifname,
string& vifname,
uint32_t& metric,
uint32_t& admin_distance,
string& protocol_origin)
| fti_0_2_lookup_route6 |
[protected]
Lookup a route for a destination host address.
Parameters:
| dst | the destination host address to lookup. |
| gateway | the address of the next-hop router toward dst. |
| ifname | the name of the physical interface toward dst. |
| vifname | the name of the virtual interface toward dst. |
| metric | the routing metric toward dst. |
| admin_distance | the administratively defined distance toward dst. |
| protocol_origin | the name of the protocol that originated this entry. |
| XrlCmdError fti_0_2_lookup_entry4 (
const IPv4Net& dst,
IPv4& gateway,
string& ifname,
string& vifname,
uint32_t& metric,
uint32_t& admin_distance,
string& protocol_origin)
| fti_0_2_lookup_entry4 |
[protected]
Lookup a route for a destination subnet address.
Parameters:
| dst | the destination subnet address to lookup. |
| gateway | the address of the next-hop router toward dst. |
| ifname | the name of the physical interface toward dst. |
| vifname | the name of the virtual interface toward dst. |
| metric | the routing metric toward dst. |
| admin_distance | the administratively defined distance toward dst. |
| protocol_origin | the name of the protocol that originated this entry. |
| XrlCmdError fti_0_2_lookup_entry6 (
const IPv6Net& dst,
IPv6& gateway,
string& ifname,
string& vifname,
uint32_t& metric,
uint32_t& admin_distance,
string& protocol_origin)
| fti_0_2_lookup_entry6 |
[protected]
Lookup a route for a destination subnet address.
Parameters:
| dst | the destination subnet address to lookup. |
| gateway | the address of the next-hop router toward dst. |
| ifname | the name of the physical interface toward dst. |
| vifname | the name of the virtual interface toward dst. |
| metric | the routing metric toward dst. |
| admin_distance | the administratively defined distance toward dst. |
| protocol_origin | the name of the protocol that originated this entry. |
| XrlCmdError mld6igmp_client_0_1_add_membership4 (
const string& xrl_sender_name,
const string& vif_name,
const uint32_t& vif_index,
const IPv4& source,
const IPv4& group)
| mld6igmp_client_0_1_add_membership4 |
[protected]
Add/delete membership information.
Parameters:
| xrl_sender_name | the XRL name of the originator of this XRL. |
| vif_name | the name of the new vif. |
| vif_index | the index of the new vif. |
| source | the source address that has been joined/left. |
| group | the group address that has been joined/left. |
| XrlCmdError mld6igmp_client_0_1_add_membership6 (
const string& xrl_sender_name,
const string& vif_name,
const uint32_t& vif_index,
const IPv6& source,
const IPv6& group)
| mld6igmp_client_0_1_add_membership6 |
[protected]
| XrlCmdError mld6igmp_client_0_1_delete_membership4 (
const string& xrl_sender_name,
const string& vif_name,
const uint32_t& vif_index,
const IPv4& source,
const IPv4& group)
| mld6igmp_client_0_1_delete_membership4 |
[protected]
| XrlCmdError mld6igmp_client_0_1_delete_membership6 (
const string& xrl_sender_name,
const string& vif_name,
const uint32_t& vif_index,
const IPv6& source,
const IPv6& group)
| mld6igmp_client_0_1_delete_membership6 |
[protected]
| XrlCmdError pim_0_1_enable_vif (
const string& vif_name)
| pim_0_1_enable_vif |
[protected]
Enable/disable/start/stop a PIM vif interface.
Parameters:
| vif_name | the name of the vif to enable/disable/start/stop. |
| XrlCmdError pim_0_1_disable_vif (
const string& vif_name)
| pim_0_1_disable_vif |
[protected]
| XrlCmdError pim_0_1_start_vif (
const string& vif_name)
| pim_0_1_start_vif |
[protected]
| XrlCmdError pim_0_1_stop_vif (
const string& vif_name)
| pim_0_1_stop_vif |
[protected]
| XrlCmdError pim_0_1_enable_all_vifs ()
| pim_0_1_enable_all_vifs |
[protected]
Enable/disable/start/stop all PIM vif interfaces.
| XrlCmdError pim_0_1_disable_all_vifs ()
| pim_0_1_disable_all_vifs |
[protected]
| XrlCmdError pim_0_1_start_all_vifs ()
| pim_0_1_start_all_vifs |
[protected]
| XrlCmdError pim_0_1_stop_all_vifs ()
| pim_0_1_stop_all_vifs |
[protected]
| XrlCmdError pim_0_1_enable_pim ()
| pim_0_1_enable_pim |
[protected]
Enable/disable/start/stop PIM protocol and PIM CLI access.
| XrlCmdError pim_0_1_disable_pim ()
| pim_0_1_disable_pim |
[protected]
| XrlCmdError pim_0_1_enable_cli ()
| pim_0_1_enable_cli |
[protected]
| XrlCmdError pim_0_1_disable_cli ()
| pim_0_1_disable_cli |
[protected]
| XrlCmdError pim_0_1_start_pim ()
| pim_0_1_start_pim |
[protected]
| XrlCmdError pim_0_1_stop_pim ()
| pim_0_1_stop_pim |
[protected]
| XrlCmdError pim_0_1_start_cli ()
| pim_0_1_start_cli |
[protected]
| XrlCmdError pim_0_1_stop_cli ()
| pim_0_1_stop_cli |
[protected]
| XrlCmdError pim_0_1_enable_bsr ()
| pim_0_1_enable_bsr |
[protected]
Enable/disable/start/stop BSR.
| XrlCmdError pim_0_1_disable_bsr ()
| pim_0_1_disable_bsr |
[protected]
| XrlCmdError pim_0_1_start_bsr ()
| pim_0_1_start_bsr |
[protected]
| XrlCmdError pim_0_1_stop_bsr ()
| pim_0_1_stop_bsr |
[protected]
| XrlCmdError pim_0_1_add_config_scope_zone_by_vif_name4 (
const IPv4Net& scope_zone_id,
const string& vif_name)
| pim_0_1_add_config_scope_zone_by_vif_name4 |
[protected]
Add/delete scope zone.
Parameters:
| scope_zone_id | the ID of the configured zone. |
| vif_name | the name of the vif to use as a bondary of the scope zone. |
| XrlCmdError pim_0_1_add_config_scope_zone_by_vif_name6 (
const IPv6Net& scope_zone_id,
const string& vif_name)
| pim_0_1_add_config_scope_zone_by_vif_name6 |
[protected]
| XrlCmdError pim_0_1_add_config_scope_zone_by_vif_addr4 (
const IPv4Net& scope_zone_id,
const IPv4& vif_addr)
| pim_0_1_add_config_scope_zone_by_vif_addr4 |
[protected]
| XrlCmdError pim_0_1_add_config_scope_zone_by_vif_addr6 (
const IPv6Net& scope_zone_id,
const IPv6& vif_addr)
| pim_0_1_add_config_scope_zone_by_vif_addr6 |
[protected]
| XrlCmdError pim_0_1_delete_config_scope_zone_by_vif_name4 (
const IPv4Net& scope_zone_id,
const string& vif_name)
| pim_0_1_delete_config_scope_zone_by_vif_name4 |
[protected]
| XrlCmdError pim_0_1_delete_config_scope_zone_by_vif_name6 (
const IPv6Net& scope_zone_id,
const string& vif_name)
| pim_0_1_delete_config_scope_zone_by_vif_name6 |
[protected]
| XrlCmdError pim_0_1_delete_config_scope_zone_by_vif_addr4 (
const IPv4Net& scope_zone_id,
const IPv4& vif_addr)
| pim_0_1_delete_config_scope_zone_by_vif_addr4 |
[protected]
| XrlCmdError pim_0_1_delete_config_scope_zone_by_vif_addr6 (
const IPv6Net& scope_zone_id,
const IPv6& vif_addr)
| pim_0_1_delete_config_scope_zone_by_vif_addr6 |
[protected]
| XrlCmdError pim_0_1_add_config_cand_bsr_by_vif_name4 (
const IPv4Net& scope_zone_id,
const bool& is_scope_zone,
const string& vif_name,
const uint32_t& bsr_priority,
const uint32_t& hash_masklen)
| pim_0_1_add_config_cand_bsr_by_vif_name4 |
[protected]
Add/delete candidate-BSR configuration.
Parameters:
| scope_zone_id | the ID of the configured zone. |
| is_scope_zone | true if configuring administratively scoped zone. |
| vif_name | the name of the vif to use its address as a candidate-BSR. |
| bsr_priority | the BSR priority (larger is better). |
| hash_masklen | the hash mask length. |
| XrlCmdError pim_0_1_add_config_cand_bsr_by_vif_name6 (
const IPv6Net& scope_zone_id,
const bool& is_scope_zone,
const string& vif_name,
const uint32_t& bsr_priority,
const uint32_t& hash_masklen)
| pim_0_1_add_config_cand_bsr_by_vif_name6 |
[protected]
| XrlCmdError pim_0_1_add_config_cand_bsr_by_addr4 (
const IPv4Net& scope_zone_id,
const bool& is_scope_zone,
const IPv4& cand_bsr_addr,
const uint32_t& bsr_priority,
const uint32_t& hash_masklen)
| pim_0_1_add_config_cand_bsr_by_addr4 |
[protected]
| XrlCmdError pim_0_1_add_config_cand_bsr_by_addr6 (
const IPv6Net& scope_zone_id,
const bool& is_scope_zone,
const IPv6& cand_bsr_addr,
const uint32_t& bsr_priority,
const uint32_t& hash_masklen)
| pim_0_1_add_config_cand_bsr_by_addr6 |
[protected]
| XrlCmdError pim_0_1_delete_config_cand_bsr4 (
const IPv4Net& scope_zone_id,
const bool& is_scope_zone)
| pim_0_1_delete_config_cand_bsr4 |
[protected]
| XrlCmdError pim_0_1_delete_config_cand_bsr6 (
const IPv6Net& scope_zone_id,
const bool& is_scope_zone)
| pim_0_1_delete_config_cand_bsr6 |
[protected]
| XrlCmdError pim_0_1_add_config_cand_rp_by_vif_name4 (
const IPv4Net& group_prefix,
const bool& is_scope_zone,
const string& vif_name,
const uint32_t& rp_priority,
const uint32_t& rp_holdtime)
| pim_0_1_add_config_cand_rp_by_vif_name4 |
[protected]
Add/delete Candidate-RP configuration.
Parameters:
| group_prefix | the group prefix of the configured zone. |
| is_scope_zone | true if configuring administratively scoped zone. |
| vif_name | the name of the vif to use its address as a candidate-RP. |
| rp_priority | the Cand-RP priority (smaller is better). |
| rp_holdtime | the Cand-RP holdtime (in seconds). |
| XrlCmdError pim_0_1_add_config_cand_rp_by_vif_name6 (
const IPv6Net& group_prefix,
const bool& is_scope_zone,
const string& vif_name,
const uint32_t& rp_priority,
const uint32_t& rp_holdtime)
| pim_0_1_add_config_cand_rp_by_vif_name6 |
[protected]
| XrlCmdError pim_0_1_add_config_cand_rp_by_addr4 (
const IPv4Net& group_prefix,
const bool& is_scope_zone,
const IPv4& cand_rp_addr,
const uint32_t& rp_priority,
const uint32_t& rp_holdtime)
| pim_0_1_add_config_cand_rp_by_addr4 |
[protected]
| XrlCmdError pim_0_1_add_config_cand_rp_by_addr6 (
const IPv6Net& group_prefix,
const bool& is_scope_zone,
const IPv6& cand_rp_addr,
const uint32_t& rp_priority,
const uint32_t& rp_holdtime)
| pim_0_1_add_config_cand_rp_by_addr6 |
[protected]
| XrlCmdError pim_0_1_delete_config_cand_rp_by_vif_name4 (
const IPv4Net& group_prefix,
const bool& is_scope_zone,
const string& vif_name)
| pim_0_1_delete_config_cand_rp_by_vif_name4 |
[protected]
| XrlCmdError pim_0_1_delete_config_cand_rp_by_vif_name6 (
const IPv6Net& group_prefix,
const bool& is_scope_zone,
const string& vif_name)
| pim_0_1_delete_config_cand_rp_by_vif_name6 |
[protected]
| XrlCmdError pim_0_1_delete_config_cand_rp_by_addr4 (
const IPv4Net& group_prefix,
const bool& is_scope_zone,
const IPv4& cand_rp_addr)
| pim_0_1_delete_config_cand_rp_by_addr4 |
[protected]
| XrlCmdError pim_0_1_delete_config_cand_rp_by_addr6 (
const IPv6Net& group_prefix,
const bool& is_scope_zone,
const IPv6& cand_rp_addr)
| pim_0_1_delete_config_cand_rp_by_addr6 |
[protected]
| XrlCmdError pim_0_1_add_config_static_rp4 (
const IPv4Net& group_prefix,
const IPv4& rp_addr,
const uint32_t& rp_priority,
const uint32_t& hash_masklen)
| pim_0_1_add_config_static_rp4 |
[protected]
Add/delete/complete static RP configuration.
Parameters:
| group_prefix | the group prefix for the RP. |
| rp_addr | the RP address. |
| rp_priority | the RP priority (smaller is better). |
| hash_masklen | the hash masklen used in computing an RP for a group. It should be same across all RPs. If set to zero, the default one will be used. |
| XrlCmdError pim_0_1_add_config_static_rp6 (
const IPv6Net& group_prefix,
const IPv6& rp_addr,
const uint32_t& rp_priority,
const uint32_t& hash_masklen)
| pim_0_1_add_config_static_rp6 |
[protected]
| XrlCmdError pim_0_1_delete_config_static_rp4 (
const IPv4Net& group_prefix,
const IPv4& rp_addr)
| pim_0_1_delete_config_static_rp4 |
[protected]
| XrlCmdError pim_0_1_delete_config_static_rp6 (
const IPv6Net& group_prefix,
const IPv6& rp_addr)
| pim_0_1_delete_confi |
